User Submitted Data Using the Vertex™ Accessory

The following datasets were sent in from Michael D. Julian of the USC Loker Hydrocarbon Research Institute. All comments are from his data files.

Comments: 90-134 deg 525-725 nm Place your cursor over the image to see the 3D data representation. Click image to enlarge 2D view in new window.

Comments: slits = 1 w/ bl vs neutral density filter red silica beads vert deposition. 5 deg inc 5-85 degrees, 5, 85 have some clipping due to accessory This scan is of a Photonic Crystal with a stop band in the red region. The scan was taken at slits = 1, vs a front face mirror baseline, using a neutral density filter in the reference beam path. The scans are in 5 deg. increments from 5-85 degrees. Because of the sample, some clipping occurs at 5 and 85 degrees. Place your cursor over the image to see the 3D data representation. Click image to enlarge in new window.

Comments: These scans were of a Photonic Crystal with a blue stop band. The scan conditions were: slits = 1, 5 - 85 degrees (5 deg inc), 1 nm step size, front face mirror bl, neutral density filter in the ref. beam. Of particular interest to us were the scans between 40 and 50 degrees; using the vertex accessory we were able to further explore this region. Place your cursor over the image to see the 3D data representation. Click image to enlarge in new window.

Click here to go to the Vertex™ page.

View sample data from an Olis Upgraded Cary 14.